bzw06 series vishay semiconductors formerly general semiconductor document number 88317 www.vishay.com 03-may-02 1 t rans z orb transient voltage suppressors stand off voltage 5.8 to 376v peak pulse power 600w maximum ratings and thermal characteristics ratings at 25? ambient temperature unless otherwise specified. parameter symbol value unit peak pulse power dissipation with a 10/1000 s waveform (1) (fig. 1) p ppm 600 w peak pulse current with a 10/1000 s waveform (1) i ppm see next table a steady state power dissipation at t a = 75 c lead lengths, 0.375" (9.5mm) (2) p m(av) 3.0 w peak forward surge current, 10ms single half sine-wave i fsm 100 a unidirectional only thermal resistance junction to lead r jl 60 c/w junction to ambient l lead = 10mm r ja 100 operating junction and storage temperature range t j , t stg 65 to +175 c notes : (1) non-repetitive current pulse, per fig. 3 and derated above t a = 25? per fig. 2 rating is 500w between 40v and 188v types. for a surge greater than the maximum values, the diode will short circuit. (2) mounted on copper pad area of 1.6 x 1.6 (40 x 40mm) per fig. 5 0.034 (0.86) 0.028 (0.71) 0.120 (3.05) 0.116 (2.95) dia. dia. 1.220 (31) min. 1.024 (26) 0.238 (6.05) 0.250 (6.35) 1.220 (31) 1.024 (26) dimensions in inches and (millimeters) f126 features plastic package has underwriters laboratory flammability classification 94v-0 glass passivated junction uni and bidirectional types available excellent clamping capability low incremental surge resistance fast response time: theoretically (with no parisitic inductance) less than 1.0ps from 0 volts to v (br) for unidirectional and 5.0ns for bidirectional types high temperature soldering guaranteed: 265 c/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension mechanical data case: f126 molded plastic body over passivated junction terminals: solder plated axial leads, solderable per mil-std-750, method 2026 polarity: for unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal tvs operation mounting position: any weight: 0.015 oz., 0.4 g packaging codes ?options (antistatic): 51 1k per bulk box, 10k/carton 54 4k per 13" paper reel (52mm horiz. tape), 12k/carton 73 2k per horiz. tape & ammo box, 20k/carton devices for bidirectional applications for bi-directional use add suffix letter b (e.g. bzw06p-6v4b). electrical characteristics apply in both directions. new product
bzw06 series vishay semiconductors formerly general semiconductor www.vishay.com document number 88317 2 03-may-02 electrical characteristics (t a =25 c unless otherwise noted) undirectional bidirectional a v v ma v a v a %/c pf bzw06-5v8 bzw06-5v8b 1000 5.8 6.45 10 10.5 57.0 13.4 298 0.057 4000 bzw06-6v4 bzw06-6v4b 500 6.4 7.13 10 11.3 53.0 14.5 276 0.061 3700 bzw06-8v5 bzw06-8v5b 10 8.5 9.50 1 14.5 41.0 18.6 215 0.073 2800 bzw06-10 bzw06-10b 5 10.2 11.4 1 16.7 36.0 21.7 184 0.078 2300 bzw06-13 bzw06-13b 5 12.8 14.3 1 21.2 28.0 27.2 147 0.084 1900 bzw06-15 bzw06-15b 1 15.3 17.1 1 25.2 24.0 32.5 123 0.088 1600 bzw06-19 bzw06-19b 1 18.8 20.9 1 30.6 19.6 39.3 102 0.092 1350 bzw06-20 bzw06-20b 1 20.5 22.8 1 33.2 18.0 42.8 93.0 0.094 1250 bzw06-23 bzw06-23b 1 23.1 25.7 1 37.5 16.0 48.3 83.0 0.096 1150 bzw06-26 bzw06-26b 1 25.6 28.5 1 41.5 14.5 53.5 75.0 0.097 1075 bzw06-28 bzw06-28b 1 28.2 31.4 1 45.7 13.1 59.0 68.0 0.098 1000 bzw06-31 bzw06-31b 1 30.8 34.2 1 49.9 12.0 64.3 62.0 0.099 950 bzw06-33 bzw06-33b 1 33.3 37.1 1 53.9 11.1 69.7 57.0 0.100 900 bzw06-40 bzw06-40b 1 40.2 44.7 1 64.8 9.3 84.0 48.0 0.101 800 bzw06-48 bzw06-48b 1 47.8 53.2 1 77.0 6.5 100 40.0 0.103 700 bzw06-58 bzw06-58b 1 58.1 64.6 1 92.0 5.4 121 33.0 0.104 625 bzw06-70 bzw06-70b 1 70.1 77.9 1 113 4.4 146 27.0 0.105 550 bzw06-85 bzw06-85b 1 85.5 95.0 1 137 3.6 178 22.5 0.106 500 bzw06-102 bzw06-102b 1 102 114 1 165 3.0 212 19.0 0.107 450 bzw06-128 bzw06-128b 1 128 143 1 207 2.4 265 15.0 0.108 400 bzw06-154 bzw06-154b 1 154 171 1 246 2.0 317 12.6 0.108 360 bzw06-171 bzw06-171b 1 171 190 1 274 1.8 353 11.3 0.108 350 bzw06-188 bzw06-188b 1 188 209 1 328 1.5 388 10.3 0.108 330 bzw06-213 bzw06-213b 1 213 237 1 344 1.7 442 9.0 0.110 310 bzw06-256 bzw06-256b 1 256 285 1 414 1.4 529 7.6 0.110 290 bzw06-273 bzw06-273b 1 273 304 1 438 1.4 564 7.1 0.110 280 bzw06-299 bzw06-299b 1 299 332 1 482 1.2 618 6.5 0.110 270 bzw06-342 bzw06-342b 1 342 380 1 548 1.1 706 5.7 0.110 360 bzw06-376 bzw06-376b 1 376 418 1 603 1.0 776 5.7 0.100 350 notes: (1) pulse test: t p < 50ms (2) ? v (br) = t * (t a - 25) *v (br) (25 c) (3) v r = 0 v, f = 1 mh z . for bidirectional types, capacitance value is divided by 2 part number i d @ v wm (max) v (br) @ i t (min) (1) v c @ i pp (max) 10/1000s v c @ i pp (max) 8/20s max. temp. coefficient of v (br) (2) typical capacitance c (3)
bzw06 series vishay semiconductors formerly general semiconductor document number 88317 www.vishay.com 03-may-02 3 ratings and characteristic curves (t a = 25 c unless otherwise noted) 0 50 100 150 200 0 25 50 75 100 25 75 125 175 0 50 100 150 200 0 1.0 2.0 3.0 4.0 75 25 125 175 1 10 100 10 100 200 5 100 500 10 100 1,000 10,000 0.1 s 1.0 s 10 s 100 s 1.0ms 10ms 0.1 1.0 10 100 fig. 1 peak pulse power rating curve p ppm peak pulse power (kw) non-repetitive pulse waveform shown in fig. 3 t a = 25 c td pulse width (sec.) peak pulse power (p pp ) or current (i pp ) derating in percentage, % t a ambient temperature ( c) fig. 2 pulse derating curve fig. 4 - maximum non-repetitive forward surge current uni-directional only i fsm peak forward surge current (a) number of cycles at 60 hz 8.3ms single half sine-wave (jedec method) p m(av) , steady state power dissipation (w) fig. 5 steady state power derating curve t l lead temperature ( c) l = 0.375" (9.5mm) lead lengths 1.6 x 1.6 x .040" (40 x 40 x 1mm) copper heat sinks c j capacitance (pf) reverse voltage (v) fig. 6 capacitance v r = 0 v r = rated stand-off voltage unidirectional bidirectional 0 50 100 150 i ppm peak pulse current, % i rsm fig. 3 pulse waveform t j = 25 c pulse width (td) is defined as the point where the peak current decays to 50% of i ppm tr = 10 sec. peak value i ppm half value ipp i ppm 2 td 10/1000 sec. waveform as defined by r.e.a. 0 1.0 2.0 3.0 4.0 t time (ms)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
